Look for deformation
Cracks, damaged edges, changes in curvature or vibration justify removing the propeller. Replace the game according to the manual.
Don't mix references
Similar propellers can have different pitch, direction or anchorage. Confirm model and position.
After a contact
A slight fall or hit with a branch requires inspection before the next takeoff, even if the aircraft appears stable.
DroneBase Checklist
This guide is only useful if it results in a verifiable decision. Before closing the purchase, preparing the equipment or taking off, make sure you can confirm each of these points with the manufacturer's documentation, the actual state of the material and the specific conditions of the operation.
- Edges without bumps.
- Uniform curvature.
- Firm anchors.
- Correct pair and direction.
- Absence of vibration.
- Original reference confirmed.
If one of the data is missing or depends on the variant, treat it as pending. Don't replace a missing specification with a trade promise or a zone check with an old capture. The correct decision is the one that remains valid when the pack, environment or flight plan changes.
What should you be able to answer when you finish?
Which information is official and which is only indicative? What condition can change the result? What check should you repeat just before using the drone? If the three answers are clear, the guide has fulfilled its function: reducing uncertainty without pretending that all flights and all products are the same.
The DroneBase RuleIf a decision depends on the specific location, the marking of the drone or the type of operation, always confirm the case with CAA and CAA airspace alerting guidance before taking off.
